Panduit ATLONA AT-USB-EX100-KIT Installation Manual
Panduit ATLONA AT-USB-EX100-KIT Installation Manual

Panduit ATLONA AT-USB-EX100-KIT Installation Manual

Hide thumbs Also See for ATLONA AT-USB-EX100-KIT:

Advertisement

Quick Links

HDBaseT Extender Kit for USB 2.0
AT-USB-EX100-KIT
The Atlona AT-USB-EX100-KIT is a long-distance extender kit for high speed USB signals. It
supports transmission of USB 2.0 data up to 330 feet (100 meters) using a single, cost effective
Category-type twisted pair cable. The AT-USB-EX100-KIT is ideal for popular conferencing
applications such as Zoom® and Microsoft® Teams®, where USB components including
laptops, cameras, microphones, and speakers are located in different areas of the room. The kit
is also suitable in classrooms for routing USB between an interactive display or projector, and
the instructor's laptop. The AT-USB-EX100-KIT includes both transmitter and receiver endpoints.
Compact enclosures and included brackets allow the devices to be discretely mounted near
computers and USB peripherals. The AT-USB-EX100-KIT is a great solution for connecting USB
components separated by distances not supported by traditional cabling.
Package Contents
1 x AT-USB-EX100-TX
1 x AT-USB-EX100-RX
2 x 5 V / 4 A Power Supplies
4 x Mounting Plates
8 x Mounting Screws
1 x Installation Guide
IMPORTANT: Visit https://www.atlona.com/product/AT-USB-EX100-KIT for the latest
firmware updates and User Manual.
1
Installation Guide
AT-USB-EX100-KIT

Advertisement

Table of Contents
loading

Summary of Contents for Panduit ATLONA AT-USB-EX100-KIT

  • Page 1 HDBaseT Extender Kit for USB 2.0 AT-USB-EX100-KIT The Atlona AT-USB-EX100-KIT is a long-distance extender kit for high speed USB signals. It supports transmission of USB 2.0 data up to 330 feet (100 meters) using a single, cost effective Category-type twisted pair cable. The AT-USB-EX100-KIT is ideal for popular conferencing applications such as Zoom®...
  • Page 2 Installation Guide AT-USB-EX100-KIT AT-USB-EX100-TX DEVIC DEVICE HOST Front AT-USB-EX100-TX DC 5V HDBaseT OUT DC 5V Rear DEVICE Connect up to two USB devices (e.g. mouse, keyboard, etc.) to these ports. These ports provide 2.5 W per USB device interface. HOST Connect a USB cable from this port to the host computer.
  • Page 3 Installation Guide AT-USB-EX100-KIT AT-USB-EX100-RX DEVICE Front AT-USB-EX100-TX AT-USB-EX100-RX seT OUT DC 5V HDBaseT IN Rear DEVICE Connect up to four USB devices (e.g. mouse, keyboard, etc.) to these ports. These ports provide 2.5 W per USB device interface. Connect a micro-USB to USB-A cable from this port, to a computer, to update the firmware. The PWR LED indicator will glow green when the AT-USB-EX100-RX is powered.
  • Page 4: Installation

    Installation Guide AT-USB-EX100-KIT AT-USB-EX100-TX AT-USB-EX100-RX Installation Connect up to two USB devices (speakerphone, etc.) to the DEVICE ports on the AT-USB- DC 5V HDBaseT OUT DC 5V HDBaseT IN EX100-TX. These ports provide 2.5 W per USB device interface. Connect a USB cable from the host device to the HOST port on the AT-USB-EX100-TX. AT-USB-EX100-RX Connect up to four USB devices (mouse, keyboard, etc.) to the DEVICE ports on the AT- USB-EX100-RX.
  • Page 5: Led Indicators

    Installation Guide AT-USB-EX100-KIT LED Indicators The PWR indicator on both the AT-USB-EX100-TX and AT-USB-EX100-RX provide power state information on both the AT-USB-EX100-TX and AT-USB-EX100-RX. Description Solid green Unit is powered. Unit is not powered. • Verify that the locking connector is securely fastened to the power receptacle.
  • Page 6 Installation Guide AT-USB-EX100-KIT Position the mounting brackets, as shown below, aligning the holes on the side of the enclosure with one set of holes on the mounting bracket. Use the screws from Step 1 to attach the mounting brackets, plus two additional screws (included) to complete the installation.
  • Page 7: Updating The Firmware

    Installation Guide AT-USB-EX100-KIT Updating the Firmware Requirements: • AT-USB-EX100-TX • AT-USB-EX100-RX • Firmware file • Computer running Windows • USB-A to USB micro-B cable Disconnect power from the AT-USB-EX100-TX. Connect a USB-A to USB micro-B cable between the PC and the FW port on the AT-USB- EX100-TX.
  • Page 8: Warranty

    Installation Guide AT-USB-EX100-KIT Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-usb-ex100-kit/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. International atlona.com 41.43.508.4321...

Table of Contents