ProLights Tribe LUMIPIX12UQ User Manual page 39

• Fade will slowly switch the effect. Snap will rapidly switch the effect.
To black out the lights:
• Press BLACK OUT on the controller.
• This will turn off all the lights until the button is pressed again.
NOTE - The controller will not respond to any inputs when Black Out is activated. If the remote does not
respond when a button is pressed, try pressing BLACK OUT. You may have inadvertently activated BLACK
OUT.
IRC REMOTE
BLACK
AUTO SOUND
OUT
SENSI-
STROBE SPEED
TIVITY
% FADE
MANUAL
SNAP
G B
R
A UV W
+
0
3
1 2
4 5 6
7 8 9
3.14 OPERATION WITH APP "SMARTCOLORS"
Important: WIFIUSB hardware is required to use this app.
WIFIBOX is a new-generation light control system, conceived to obtain an easy and versatile platform for
LED projectors. The signal transmission is managed wired and wireless (through Wi-Fi), both in input and
output, even allowing to control the fixtures through a smartphones applications "Smarcolors", available
for IOS and Android devices. Before using the application, check that all devices are properly configured
with WIFIUSB. For device's configuration refer to the WIFIUSB manual available on "www.musiclights.it".
LUMIPIX12UQ
MASTER
SLAVE
SLAVE
SLAVE
SLAVE
Fig.8 - Configurazione modalità Master/Slave
17