Introduction; Description; Technical Specifications - ProLights Tribe LUMIPIX12UQ User Manual

LUMIPIX12UQ
3

- 1 - INTRODUCTION

1.1 DESCRIPTION

LUMIPIX12UQ is a linear colorchanger equipped with 12 high-efficiency RGBW/FullColor LEDs (8W each)
in a 1mt format. Control system is customizable allowing "Section Control" and advanced possibilities in
effect generation as LED video or sound activated arrays.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE
• Source:12x8 W RGBW LEDs
• Luminous Flux:2224 lm
• Lux:1813 lux @3m Full
• Source Life Expectancy: >50.000 h
OPTICS
• Beam Angle:19 °
• Field Angle:36 °
COLOR SYSTEM
• Color Mixing: RGBW/FC
• CTC: CTC control through independent DMX channel
• Color Wheel: Virtual color wheel with presets
• Macros: Several pre-build pixel macros with adjustable speed
DYNAMIC EFFECTS
• Static Color Mode: Selection of static color
• Manual Color Mode: Manual adjustment of color
• Auto Mode: Built-in programs with execution speed adjustment
• Sound Mode: Music activation through internal microphone, sensitivity contr.
BODY
• Body: Sturdy aluminum profile
• Body Color: Black
CONTROL
• Protocols: DMX512
• Dmx Channels:4/7/9/12/17 ch
• Pixel Control: Section control
• Display: LED display user interface
• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX1) not included
• IR: Infra-Red sensor controlled by remote
• Master/Slave: for synchronized operation of more units linked in a chain
ELECTRONICS
• Dimmer: Linear 0~100% electronic dimmer
• Dimmer Curves:4 Different dimming curves available
• Strobe/Shutter:1-28 Hz, electronic
• Operating Temperature: 0/45°