Flywheel Brake Lever; Drive Clutch Lever (Hrm215Sda) - Honda HRM215PDA Harmony Owner's Manual

Flywheel Brake Lever
CONTROLS
This lever is connected to the engine flywheel brake and the
ignition switch. The engine will not start and run unless this lever
is pulled back.
FLYWHEEL
/
BRAKE
LEVER
To start the engine, pull this lever
back, and hold it against the
handlebar while operating the
recoil starter. Continue to hold
the lever against the handlebar
while mowing.
To stop the engine and blade,
release the lever.
Drive Clutch Lever
(HRM215SDA)
The drive clutch lever engages and disengages the transmission
that drives the rear wheels.
To propel the mower, move the drive clutch lever up and hold it
anainst the handlebar.
Release the drive clutch lever to
stop the mower.
Operate the drive clutch lever
with a quick and complete
motion, so the drive clutch is
always either fully engaged or
released. This will help to extend
the service life of the clutch
mechanism.
CLUTCH
LEVER
Always release the drive clutch
lever before starting the engine.
If the drive clutch is engaged, the
mower will move forward when
you operate the starter.
11