Flywheel Brake Lever; Drive Clutch Lever (Hrmzlsva) - Honda HRM21PVA Owner's Manual

4. CONTROLS
FLYWHEEL BRAKE LEVER (all models)
This lever is connected to the engine
flywheel brake and the ignition
system. The engine will not start or
run unless this lever is pushed forward.
To start the engine and blade, push the
lever forward and hold it against the
handlebar while operating the recoil
starter. Continue to hold the lever
against the handlebar while mowing
and mulching.
To stop the engine and blade, release
the lever.
DRIVE CLUTCH LEVER
(HRM21SVA only)
This lever operates the drive clutch for
the rear wheels.
Maximum drive speed at full throttle
is 3.3 feet per second (1.0 meter per
second).
For self-propelled operation, push the
drive clutch lever forward, and hold it
against the handlebar together with
the flywheel brake lever. Release the
lever to disengage the drive.
Always release the drive clutch lever
before starting the engine. If the drive
clutch lever is held forward while
starting, the mower will move forward
before you are ready to guide it.
FLYWHEEL BRAKE LEVER
@RIVE CLUTCH LEVER
(HRMZlSVA -ONLY)
13