Received Fax Quality Is Poor; Cannot Solve Problem; Cannot Solve Printing Or Copying Problems - Epson L5290 Series User Manual

Solving Problems

Received Fax Quality is Poor

The Image Quality of Received Faxes is Poor
The following causes can be considered.
ECM setting is disabled.
Solutions
Select Settings > Fax Settings > Basic Settings and enable the ECM setting on the printer's control panel.
This may clear errors that occur due to connection problems. Note that the speed of sending and
receiving faxes may be slower than when ECM is disabled.
The image quality setting is low on the sender's fax machine.
Solutions
Ask the sender to send faxes at a higher quality.

Cannot Solve Problem

If you cannot solve the problem after trying all of the solutions, contact Epson support.
If you cannot solve printing or copying problems, see the following related information.
Related Information
"Cannot Solve Printing or Copying Problems" on page 221
&

Cannot Solve Printing or Copying Problems

Try the following problems in order starting at the top until you solve the problem.
❏ Make sure you match the paper type loaded in the printer and the paper type set on the printer to the paper
type settings in the printer driver.
"Paper Size and Type Settings" on page 27
❏ Use a higher quality setting on the control panel or the printer driver.
❏ To check the actual ink remaining, visually check the ink levels in the printer's tanks. Refill the ink tanks if the
ink levels are below the lower lines.
❏ Align the print head.
"Aligning the Print Head" on page 123
> >

Cannot Solve Problem

Cannot Solve Printing or Copying Problems
221