Setting Up A Wsd Port - Epson L5290 Series User Manual

Scanning
>
Scanning Originals Using WSD
2. Select Scan on the control panel.
To select an item, use the
3. Select To WSD.
4. Select a computer.
5. Press the
x
button.

Setting Up a WSD Port

This section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
The following is necessary to set up a WSD port.
❏ The printer and the computer are connected to the network.
❏ The printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
>
Setting Up a WSD Port
u d l r
buttons, and then press the OK button.
84