Cleaning The Printer; Cleaning Spilled Ink; Checking The Total Number Of Pages Fed Through The Printer - Epson L5290 Series User Manual

Maintaining the Printer

Cleaning the Printer

If the components and the case are dirty or dusty, turn off the printer and clean them using a soft, clean cloth that
has been dampened with water. If you cannot remove the dirt, try adding a small amount of mild detergent to the
damp cloth.
Important:
c
❏ Be careful not to get water onto the printer mechanism or any electrical components. Otherwise, the printer
could be damaged.
❏ Never use alcohol or paint thinner to cleanthe components and the case. These chemicals can damage them.

Cleaning Spilled ink

If ink has been spilled, clean it up in the following ways.
❏ If ink adheres to the area around the tank, wipe it off using a napless, clean cloth or cotton swab.
❏ If ink spills on the desk or floor, wipe it off immediately. When ink is dried, it will be difficult to remove the
smear. To prevent the smear from spreading, blot the ink with a dry cloth, and then wipe it with a moist cloth.
❏ If ink gets on your hands, wash them with water and soap.
Checking the Total Number of Pages Fed Through the
Printer
You can check the total number of pages fed through the printer. The information is printed together with the
nozzle check pattern.
1. Select Maintenance on the printer's control panel.
To select an item, use the
2. Select Nozzle Check.
3. Follow the on-screen instructions to load paper and print the nozzle check pattern.
>

Checking the Total Number of Pages Fed Through the Printer

u d l r
buttons, and then press the OK button.
128