Scan Settings; Fax Send Settings - Epson L5290 Series User Manual

Faxing
>
Menu Options for Faxing

Scan Settings

Select the menus on the control panel as described below:
Fax > Menu > Scan Settings
Resolution:
Select the resolution of the outgoing fax. If you select a higher resolution, the data size becomes larger
and it takes time to send the fax.
Density:
Sets the density of the outgoing fax. Press
lighter.
ADF Continuous Scan:
Sending faxes by placing originals one by one, or by placing originals by size, you can send them as
one document at their original sizes. See the related information below on this topic.
Original Size (Glass):
Select the size and orientation of the original you placed on the scanner glass.
Color Mode:
Select whether to scan in color or in monochrome.
Related Information
"Sending Different Size Documents Using ADF (ADF Continuous Scan)" on page 105
&

Fax Send Settings

Select the menus on the control panel as described below:
Fax > Menu > Fax Send Settings
Direct Send:
Sends a monochrome fax while scanning the originals. Since scanned originals are not stored
temporarily in the printer's memory even when sending a large volume of pages, you can avoid
printer errors due to a lack of memory. Note that sending using this feature takes longer than not
using this feature. See the related information below on this topic.
You cannot use this feature when sending a fax to multiple recipients.
Send Fax Later:
Sends a fax at a time you specified. Only a monochrome fax is available when using this option. See
the related information below on this topic.
Add Sender Info:
Select the position where you want to include the header information (sender name and fax number)
in the outgoing fax, or not to include the information.
>
Fax Send Settings
r
to make the density darker, and press
109
l
to make it