Table of Contents
Advertisement
40
en | Operation
Item
Active
Window
Selecting an area for privacy masking
To set up an area for privacy masking, access the area menu by selecting the Area option from
the privacy masking menu. Upon entering the Area menu, the current area is displayed with
the upper left corner flashing. You can move the flashing corner of the image with the Up,
Down, Left, Right arrow keys. Press the Select key to move the flashing cursor to the opposite
corner, which can now be moved. Press Select again to freeze the area and exit the area
menu.
There are four programmable privacy mask areas.
8.5.9
Defaults submenu
Item
Restore All
2016.03 | 1.0 | F.01U.318.222
Selection
Description
On, Off
Turns each of the four masks on or off.
Submenu
Select to open a window in which to define the mask area.
Selection
Description
No, Yes
Restores all settings of the six modes to their default
(factory) values. Select YES, then press the Menu/Select
button to restore all values.
When completed, the message RESTORED! appears.
Installation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
EX65 Explosion-Protected Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
