Table of Contents
Advertisement
44
en | Maintenance
2. Using a 10 mm wrench or the multi-use tool, remove the three (3) M6 bolts holding the
mounting cradle to the mounting surface.
3. Put the unit in a safe location.
4. Using a 7 mm wrench or the multi-use tool, remove the seven (7) M4 bolts holding the
mounting cradle to the housing.
5. Install a new mounting cradle in reverse of installation and tighten the seven (7) M4 bolts
to 2.0 N m (1.5 ft/lb).
6. Finish installation as described in Mounting, page 26.
2016.03 | 1.0 | F.01U.318.222
Installation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
EX65 Explosion-Protected Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
