Table of Contents
Advertisement
FlexiDome2X
5.6.5
Privacy masking submenu
Item
Pattern
Mask
Active
Window
Selecting an area for privacy masking
To set-up an area for privacy masking, access the area menu by
selecting the Area option from the privacy masking menu. Upon
entering the Area menu, the current area is displayed with the
upper left corner flashing. The flashing corner of the image can
be moved with the Up, Down, Left, Right arrow keys. Pressing
the Select key moves the flashing cursor to the opposite corner,
which can now be moved. Pressing Select again freezes the
area and exits the area menu.
There are four programmable privacy mask areas.
5.6.6
Defaults submenu
Item
Restore All
Bosch Security Systems
Selection
Black, Grey,
White, Noise
1, 2, 3, 4
On, Off
Submenu
Selection
No, Yes
Installation Manual
Description
Selects pattern for all masks.
Four different areas can be masked.
Turns each of the four masks on or off.
Select to open a window in which to define
the mask area.
Description
Restores all settings of the six modes to their
default (factory) values. Select YES then
press the Menu/Select button to restore all
values.
When completed the message RESTORED! is
shown.
Configuration | en
AR18-08-B010 | v1.0 | 2009.03
45
Hide quick links:
Advertisement
Table of Contents
