Table of Contents
Advertisement
32
en | Operation
8.4.3
Shutter/AGC submenu
Item
Shutter
Default (AES)
shutter
or
Fixed shutter
Actual shutter
Gain control
Maximum AGC
or
Fixed AGC
Actual AGC
SensUp
Dynamic
EXIT
2016.03 | 1.0 | F.01U.318.222
Selection
Description
AES, FL,
AES (auto-shutter) - the camera automatically sets the
Fixed
optimum shutter speed.
FL - flickerless mode avoids interference from light
sources (recommended for video-iris or DC-iris lenses
only).
FIXED - allows a user defined shutter speed.
1/50 (PAL),
In AES mode, the camera tries to maintain the selected
1/60 (NTSC)
shutter speed as long as the light level of the scene is high
1/100, 1/120,
enough.
1/250,
In Fixed mode, selects shutter speed.
1/500,
1/1000,
1/2000,
1/5000,
1/10K
Displays the actual shutter value from the camera to help
compare lighting levels and optimum shutter speed during
set-up.
On, Fixed
On - the camera automatically sets the gain to the lowest
possible value needed to maintain a good picture.
Fixed - sets Fixed AGC value.
0 to 30 dB
Selects the maximum value the gain can have during AGC
operation.
Selects the gain setting for Fixed gain operation (0 is no
gain).
Displays the actual AGC value from the camera to help
compare gain level with lighting levels and picture
performance.
Off, 2x, 3x,
Selects the factor by which the sensitivity of the camera is
..., 10x
increased.
When active, some noise or spots may appear in the
picture. This is normal camera behavior. It may also cause
motion blur on moving objects.
Returns to main menu.
Installation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
EX65 Explosion-Protected Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
