Customise Beo4 - Bang & Olufsen BeoVision 6 Manual

The Beo4 buttons give direct remote
control of a large number of
television functions, and the Beo4
display gives you access to even
more functions.
Whenever a source is displayed on
Beo4 (such as TV or RADIO), you can
press the LIST button and bring up
extra functions in the display to help
you operate that source, just as if
you were calling up extra buttons.
You can also switch on extra
equipment connected to your
television.
Please note that Beo4 contains a list
of all of Bang & Olufsen's extra audio
and video functions, but only
functions supported by the television
work when you call them up in the
Beo4 display.
You can customise your Beo4 list of
functions to suit your needs, and
change the order in which these
extra functions appear when you call
them up.

Customise Beo4

Set up Beo4
If you have a Beo4 remote control already, or
you have set your television to Option 4, you
can configure the Beo4 to work with your
television.
Press and hold the standby
button down
Press to get access to the Beo4
setup function
Let go of both buttons. ADD?
appears in the display
Press repeatedly until CONFIG?
appears in the display
Press to be able to select the
type of configuration
Press repeatedly until VIDEO?
appears in the display
Press to get access to the video
configuration
Press repeatedly until VIDEO 2
appears in the display*
Press to store the configuration
STORED appears, indicating that
the configuration has been
stored. You leave the Beo4 setup
function automatically
*If the video configuration does
not contain VIDEO 2, select MX
instead. If you have set your
television to Option 4, select
VIDEO 3.
Add an extra 'button'
When you add a new function to the Beo4
list, you can then bring up this new 'button' in
the Beo4 display.
• Press and hold the standby
button down
LIST Press to get access to the Beo4
setup function
ADD? Let go of both buttons. ADD?
appears in the display
LIST Press to bring up the list of
available 'buttons' to add from.
CONFIG?
The first 'button' appears in the
GO display, it flashes on and off
Press to move forwards or
LIST backwards in the list of all extra
VIDEO? 'buttons'
GO Press to add and place the
'button' on its preset position or
as the first 'button' in the list,
LIST or...
VIDEO 2
...press to insert the 'button' at
GO a specific position in the list
ADDED appears, indicating that
STORED
the 'button' has been added.
You leave the Beo4 setup
function automatically
16
•
LIST
ADD?
GO
L
M
GO
1 – 9
ADDED