Bang & Olufsen BeoVision 6 Manual page 29

Determine the centre position
If your television is equipped with the optional
motorised stand, the STAND ADJUSTMENT
menu appears on the screen. Once the centre
position is determined, select your favourite
positions for when the television is switched on
and in standby.
STAND ADJUSTMENT
CENTRE POSITION
ADJUSTING . . .
adjust
When the STAND ADJUSTMENT menu
appears...
Make sure that there is enough room for the
television to turn to the right and left.
> Press GO to start stand adjustment.
> If the adjustment is interrupted the text
'ADJUSTMENT FAILED' appears on the screen.
Remove obstacles preventing the television from
turning, and press GO to start adjustment again.
> Once adjustment is complete, the text
'ADJUSTMENT OK' appears, followed by the
STAND POSITIONS menu.
> To store a stand position for when the television
ss tt
is switched on, press or to turn the
television and place it according to your viewing
position.
> To store a stand position for when the television
is switched to standby, press
▼
TV STANDBY.
ss tt
> Press or to turn the television and place it
as you wish.
> Press GO to store your positions.
Store all programs and settings
When you have selected the menu language,
a menu for program tuning automatically
appears on the screen.
GO
When the menu for auto tuning appears, the
prompt CHECK AERIAL CONNECTION appears to
remind you to check that your TV aerial is properly
connected.
tt
> Press to start auto tuning. The television tunes
in all available programs.
to move to
AUTO TUNE
CHECK AERIAL CONNECTION
TV
start
NOTE! For further information about stand
positions, refer to the chapter 'Set positions for
the television to turn to' on page 36.
29