Distribute Sound And Picture With Beolink - Bang & Olufsen BeoVision 6 Manual

The BeoLink system makes it possible
to distribute picture and/or sound to
other rooms throughout the house.
You can connect your television in,
for example, the living room to
another video system or set of
speakers in another room, thereby
making it possible to 'move' the
picture or sound to other rooms.
If you have a BeoLink distribution
system installed, you can either use
your television in the main room,
such as a living room, or in a link
room, such as a study or bedroom.
Distribution of video signals to a
linked television is only possible if
your television is equipped with the
optional system modulator. Under
certain circumstances, it may be
necessary to enter modulator
settings.

Distribute sound and picture with BeoLink

BeoVision 6
Link connections
The main room system must be connected to
the link room system with a Master Link cable:
> Connect the Master Link cable to the socket
marked MASTER LINK on the television.
> If you want to distribute video signals as well,
connect an ordinary aerial cable to the socket
marked LINK on the television. Then run both
cables to the link room and follow the
instructions enclosed with the link room
equipment.
If an audio system is already connected to the
Master Link socket and you wish to connect more
equipment, the Master Link cable must be split in
two and joined with the cable from the link room
using a special junction box. Contact your Bang &
Olufsen retailer for assistance.
To the MASTER LINK socket on the
link room system
To a link room television
NOTE! Groups made on a television in a main
room cannot be accessed from a link room
television.
11