Bang & Olufsen BeoVision 6 Manual page 60

>> Register additional video equipment
Options for V.TAPE include:
NONE... if no equipment is connected.
V.TAPE... if you have connected a BeoCord V 8000
video tape recorder or any other video tape
recorder.
V.TAPE+DECODER... if you have connected a
BeoCord V 8000 with a decoder connected to
it.
V.TAPE+STB... if you have connected a BeoCord
V 8000 with a set-top box connected to it.
DECODER... if you have connected a decoder.
V.AUX... if you have connected any other type of
auxiliary equipment.
STB... if you have connected a set-top box.
If you connect a BeoCord V 8000, the only options
for V.TAPE are: V.TAPE, V.TAPE+STB and
V.TAPE+DECODER.
Options for AV include:
NONE... if no equipment is connected.
DECODER... if you have connected a decoder. If
your television is equipped with the optional
Master Link module, connect the decoder to the
V.TAPE socket instead.
EXPANDER... if you have connected an Expander
box with other auxiliary equipment connected to
it.
EXPANDER+DEC... if you have connected an
Expander box with a decoder connected to it.
V.AUX... if you have connected any other type of
auxiliary equipment.
DVD... If you have connected a DVD player or
similar devices.
STB... if you have connected a set-top box.
Get access to additional video
equipment
Some of the connected equipment is
accessible via the Beo4 remote control.
Press to switch on a video tape
recorder
Press to switch on DVD 1 (or
open for input from another
DVD player)
Press repeatedly to display
V.AUX on Beo4
Press to switch on a source
registered as V.AUX, such as a
game console
In order to display V.AUX on
Beo4, you must add it to the
Beo4 list of functions. For
further information, refer to the
chapter Customise Beo4.
NOKIA 96025
NOKIA 9820T
NOKIA 9850T
PACE DTR730-IM
SKY DIGITAL
SELECTOR
CANALdig DK/S/N
MACAB DCB-101
TPS 96573D
CANAL + SAT r2
V TAPE
Planet PL 9000
CANALdigital I
ECHOSTAR 9000
CANALdigital E
TV BOX 1000-S
CANALdigital NL
DVD
NOKIA D-BOX
NOKIA D-BOX II
HUMAX F1-VACI
TechniBox CAM1
LIST
If you have connected a set-top box, you will be
V.AUX
prompted to select your set-top box from an
GO on-screen list when you select STB in the
CONNECTIONS menu.
Note: If, for some reason, you disconnect the extra
equipment and then disconnect the television
from the mains, you may have to register the
equipment again upon reconnection, even if you
have not changed your setup of extra equipment.
8
STB SETUP
store
GO