Bang & Olufsen BeoVision 6 Manual page 12

12
If you select a program and the
broadcaster offers a teletext service,
the television gives you access to
teletext pages and any subpages
linked to the pages.
The arrow buttons on Beo4, the
menu bar at the top of the screen,
and the highlighted cursor help you
move to the page you want in a
single step. When you get there, you
can pause the turning of subpages
to read them at your own pace.
The television can remember your
favourite pages, bring you back to
the previous page, reveal hidden
messages or help you switch to
another program's teletext service.
To make your favourite teletext
pages appear first, when you bring
up teletext, store them as MEMO
pages.
When you store a teletext subtitles
pages as MEMO page number nine,
you can activate subtitles
automatically.
NOTE! If your television is linked via a BeoLink
cable to another television, stored memory pages
will not be shared among linked televisions.
Memory pages must be stored manually on each
linked television.
Teletext
Basic teletext functions
Navigate through teletext pages by using the
menu bar at the top of the teletext page.
PAGE PROGRAM POINT HALT REC SETUP
P100 BBC S100 Ons 13 Oct 12:39:34
PAGE PROGRAM POINT HALT REC SETUP
P100 BBC S100 Ons 13 Oct
> Press TEXT to gain access to teletext and EXIT
to leave teletext.
> If you press EXIT and leave teletext before the
page you want is found, the display TEXT
advises you when the page is found.
> Press GO to see the page.
If you change to another program or leave teletext
by selecting a new source, you are not advised
when the page is found.
To move to a new page...
> Enter the number of the page you wish to see,
or...
ss
> ...press to move the highlighted cursor to
PAGE.
> Press or to step between pages, and hold
▲
▼
to step faster.
> Pressing GO steps to index pages (100, 200,
300...).
To move using links on a page...
> Press tt to move the cursor on the bar to POINT.
> Press GO or to place the cursor on the page.
▼
> Move the cursor via the arrow buttons to a page
reference and press GO.
To return to a previous page...
12:39:34
> When you use POINT to step to another page,
POINT on the menu bar changes to RETURN.
> Press GO to go back to the previous page.
RETURN only brings you one step back. Return to
other previously viewed pages by using the PAGE
or MEMO functions.
To move to another teletext service...
tt
> Press to move the highlighted cursor to
PROGRAM.
If MEMO pages have been created, MEMO is
highlighted when you switch on teletext. Press
or while MEMO is highlighted to find
▲ ▼
PROGRAM.
> Press GO to bring up a program list.
> Press or to find a desired program.
▲ ▼
> Press GO to switch to another teletext service.
To stop subpages from turning...
> Press STOP to stop subpages from turning, or...
> ...move the cursor to HALT and press GO. HALT
is replaced by a set of four digits.
> Use and to step to the subpage you wish
▲
▼
to see, or...
> ...enter its number using the number buttons
on Beo4.
> Press GO to restart page turning.
To reveal hidden messages and the like...
> Move the cursor on the bar to
> Press GO to change SETUP to REVEAL.
> Press GO again to reveal hidden text on the
current page.
t
.