Bang & Olufsen BeoVision 6 Manual page 24

24
You can use the Beo4 remote control
to play and search through a
videotape.
From the recording menu, you can
check, edit or delete all the timed
recordings that are waiting to be
executed.
For further information about the
video tape recorder, refer to its own
Guide. Note, however, that some
features, such as 'slow', described in
the video tape recorder's Guide are
not available when it is connected to
this television.
NOTE! Recordings can only be made as described,
if the BeoCord V 8000 is connected directly to this
television.
If you have a BeoCord V 8000...
Play and search through a tape
Once you have selected the video tape
recorder via Beo4, all operations are carried
out via Beo4. Playback of the videotape you
have loaded starts automatically.
Insert a tape in the video tape recorder...
> Press V TAPE to activate the video tape recorder
– the tape then starts automatically...
V. TAPE PLAY 2:42
While the videotape is playing...
ss tt
> Press or to cue backwards or forwards
through the tape.
ss tt
> Press or a second time to cue faster.
ss tt
> Press or a third time to rewind or fast
forward through the tape, or...
ss tt
> ...press and hold or for 2 seconds to
rewind or fast forward through the tape.
> Press GO to start or resume playback.
> Press or to step forwards or backwards
▲
▼
through different tracks or recordings on a tape.
To pause or stop a tape...
> Press GO to pause the tape, press GO again to
resume playback.
> Press STOP to stop the tape completely.
> Press the • standby button to switch the
television and the video tape recorder to
standby.
Timed recording via teletext
Recordings are easily programmed via
teletext.
TV RECORD
NOW
TELETEXT
RECORD LIST
MENU
PAGE MEMO POINT HALT
back select
PAGE PROGRAM POINT HALT REC SETUP
P202 BBC S202 Ons 13 Oct
The menu bar on the teletext page.
18:30-21:00 13. OCT P1 BBC
P202 BBC S202 Ons 13 Oct
The status line for a recording may appear above
the teletext page with both start and stop times
indicated, or on the actual program you want to
record.
PROGRAMMING STORED
The recording is now stored.
GO
12:39:34
OK?