Related Manuals for Bang & Olufsen BeoVision Avant
Summary of Contents for Bang & Olufsen BeoVision Avant
- Page 1 BeoVision Avant Guide...
-
Page 3: Contents Of The Guide
• Switch Avant on or off automatically, 50 • Use an integrated audio/video system, 52 • Use BeoVision Avant in a link room, 53 • The socket panel on the rear, 54 • lose-up operation and socket panels, 56 • The BeoVision Avant display bar, 58 •... - Page 4 The Beo4 display shows the source you have selected, or extra functions available when you press the LIST button Switch on connected audio sources, if these sources are connected to BeoVision Avant via a BeoLink cable Adjust the room lights, if a light control system is installed...
- Page 5 Displayed information and screen menus Information about selected sources is displayed on top of BeoVision Avant. Menus on the screen allow you to switch on, adjust or switch off additional functions. V.TAPE Menu 1 Timer record 2 Timer play 3 TV list...
-
Page 6: Watch Television
Beo4 remote control, though you can also adjust TV position by hand. *NOTE! Satellite channels are only available if your BeoVision Avant is equipped with the built-in Satellite receiver module. Watch television Select a TV or Satellite* channel To watch a TV or Satellite channel, press the appropriate button on Beo4. - Page 7 Adjust or mute the sound volume You can adjust or mute television sound at any time while you are using a source. While BeoVision Avant is on… ∧ Press either end of the button to ∨ adjust the volume up or down...
-
Page 8: Look Up Teletext Information
If you select a channel and the broadcaster offers a Teletext service, BeoVision Avant gives you access to Teletext pages. Sometimes a single page will consist of several subpages, which appear one by one in a repeating series. - Page 9 TEXT to switch on Teletext. *NOTE! If your BeoVision Avant is linked via a BeoLink cable to another television, stored memory pages will not be shared among linked televisions. Memory pages must be stored...
- Page 10 > Press the EJECT button on the operation panel behind the BeoVision Avant display bar to unload a tape. Never leave a tape in the compartment opening! The open flap keeps the system alert and thus wastes energy.
- Page 11 Play or stop a tape You can play a loaded tape by switching on the video tape recorder. The tape recorder will play the tape to the end, rewind it and shut itself off automatically, unless you give other instructions. When you have loaded a tape...
-
Page 12: Record A Programme
With the Video Programming via Teletext (VPT) function in the video tape recorder, you can use Teletext TV listings when you preset Avant for recording of future programmes. You can also preset a Timer recording manually. If PDC/VPS (Program Delivery Control/ Video Programming System) signals are broadcast by the current channel, you can make sure that the... - Page 13 Record here and now If you want to record the current programme or a programme about to begin, you can start recording immediately. You can also watch another TV programme or switch Avant to standby while recording. RECORD Press RECORD twice. The video RECORD tape recorder will begin recording on the current TV or...
- Page 14 For music CDs or tapes. SPEAKER 5 Surround sound from all speakers. For programmes in Dolby Surround Sound. If you have connected only two external front speakers to BeoVision Avant, you will only be able to choose SPEAKER 1 – 3.
- Page 15 Make the picture fill out the screen BeoVision Avant always ensures you the best possible picture. It automatically adapts the picture so that it fills out as much of the screen as possible. However, you can still choose a preferred format for Home Theatre viewing.
- Page 18 3508356 0101 Printed in Denmark by Bogtrykkergården a-s, Struer...