Socket Panels - Bang & Olufsen BeoVision 6 Manual

The socket panel on your television
allows you to connect signal input
cables as well as a variety of extra
equipment, such as a video tape
recorder or a linked Bang & Olufsen
music system.
The V.TAPE and AV sockets are
available for connection of extra
equipment.
Any equipment you connect to these
sockets must be registered in the
CONNECTIONS menu. The
CONNECTIONS menu is found under
OPTIONS in the TV SETUP menu. For
further information, refer to the
chapter 'First-time setup of your
television' on page 28.

Socket panels

DVI
DVI-D connection for receiving digital graphics
from an external PC. Supports following
resolutions: 480x640/60 Hz, 600x800/60 Hz and
720x1280/60 Hz.
IMPORTANT! The PC must be connected to a
grounded wall outlet as specified in the PC's
setting-up instructions.
L
Left, line signal (for sound from PC).
R
Right, line signal (for sound from PC).
~
Connection to the mains.
LINK TV
Aerial output socket for distribution of video
signals to other rooms. Only available if your
television is equipped with the built-in system
modulator.
TV
Aerial input socket from your external aerial or
cable TV network. If your television is equipped
with the built-in system modulator, connect your
external aerial to the socket marked LINK TV.
STAND
For connection of a motorised stand.
AV
21-pin socket for the AV connection of other
equipment, such as a DVD player, a set-top box, a
second decoder or a game console.
The socket may be used for an AV 2 Expander
instead, which gives the opportunity to connect a
decoder and other non-Bang & Olufsen video
equipment at the same time.
DVI
L
R
TV
LINK TV
V.TAPE
21-pin socket for the connection of a BeoCord
V 8000 video tape recorder, a set-top box, a
primary decoder or another video tape recorder.
You can also connect other types of extra
equipment.
MASTER LINK
Socket for connection of a compatible Bang &
Olufsen music system. This socket is only
functional if your television is equipped with the
Master Link module.
The socket is also used for BeoLink distribution of
sound throughout the house.
POWER LINK
For connection of external Bang & Olufsen
loudspeakers.
IR-OUT
For connection of a set-top box.
45
STAND
AV V. TAPE
MASTER LINK
IR-
OUT
POWER LINK