Table of Contents
Advertisement
If you connect additional video
equipment to your television, you
must register the equipment in the
connections menu.
When the system is first set up, the
equipment connected at that
particular moment is detected by the
television, and the CONNECTIONS
menu appears automatically on the
screen. If you connect equipment at
a later date, on a permanent basis,
then you must bring up the
CONNECTIONS menu via the
television's SETUP menu.
For information about where and
how to connect extra equipment,
refer to the chapter 'Socket panels'
on page 45 in the printed Guide.
Register additional video equipment
What is connected?
Registering the equipment connected to the
television enables you to activate it with the
Beo4 remote control.
TV SETUP
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
CONNECTIONS
CONNECTIONS
SOUND
SOUND
PICTURE
PICTURE
CLOCK
back
select
GO
BEOLINK
MENU LANGUAGE
V. TAPE
AV
back
CONNECTIONS
V. TAPE
AV
What's on the CONNECTIONS menu, p. 23.
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press
M
> Press GO to bring up the OPTIONS menu.
CONNECTIONS is highlighted already.
> Press GO to bring up the CONNECTIONS menu.
OPTIONS
ss
tt
> Press
or
corresponds to your setup.
> Press
to move to AV and press
M
select the AV option which corresponds to your
setup.
> Press GO to store this setup.
> Press
to back up through previous menus or
L
press EXIT to exit all menus directly.
select
GO
V. TAPE
NONE
store
GO
to highlight OPTIONS.
to select the V.TAPE option which
ss
tt
or
to
7
Hide quick links:
Advertisement
Chapters
Table of Contents
