Bang & Olufsen BeoVision 6 Manual page 66

>> BeoLink – your television in a link room
Link room operation
When you are in the link room, you can
operate all connected systems with the Beo4
remote control.
Use sources present only in
one of the rooms ...
Press the button for the source
you wish to use
Operate the selected source as
usual
Use a main room source –
source type present in both
rooms...
Press repeatedly on Beo4 until
LINK* is shown in the Beo4
display
Press the button for the source
you wish to use
Operate the selected source as
usual
Use a link room source –
source type present in both
rooms...
Press the button for the source
you wish to use
Operate the selected source as
usual
Listen to stereo sound in your
link room...
RADIO Usually sound distributed from a
V TAPE main room video source, such as
a set-top box, to the link room is
transmitted in mono. However,
you can select stereo sound:
Press to switch on the television
Press repeatedly until AV* is
LIST shown in the Beo4 display
LINK
Press to activate a source
connected to the main room
TV system, such as a set-top box,
or...
Press to activate a DVD player
While using this function,
distribution of other main room
sources to other link room
systems is not possible.
TV
*NOTE! In order to display LINK
and AV on Beo4, you must first
add them to the Beo4 list of
functions. For further
information, refer to the chapter
Customise Beo4.
Main room
TV
LIST
AV
SAT
DVD
14
Link room