Connection Panels - Bang & Olufsen BeoVision 7 Manual

40
PCMCIA
SMARTCARD
The CA module has one protruding edge on one
side and two on the other side. The side with two
edges should face right. When you insert a card,
the gold chip should face upwards.
PCMCIA/SMARTCARD
For a card and module for access to digital
channels. For further information about
compatible card and module combinations,
contact your Bang & Olufsen retailer.
Useful hints
HDMI source You can watch two HDMI sources at the same time if one of the sources
is connected to the HDMI A or HDMI B socket, and the other source is
connected to the HDMI C or HDMI D socket.

Connection panels

Any equipment you connect to the main connection panel must be registered in
the 'CONNECTIONS' menu. See p. 37.
VGA IN
DVB-T/C
PROJECTOR OUT A
DVI-D OUT
VIDEO L IN R IN SPDIF
IN
AV 5
STAND
AV 1
SPDIF PUC
1
(Ethernet)*
For connection to the Internet.
DVB T/C
Aerial input sockets from external aerial/cable TV
network.
VGA IN
Socket for connection of a High Definition video
source or a PC.
LINK TV OUT
Aerial output for distribution of video signals to
other rooms.
LINK TV
OUT CINEMA CONTROL
B C D
HDMI IN
PUC TTL RS232 PUC 1+2 IR-IN
CONTROL
MASTER LINK
AV 2
Y Pb Pr SPDIF PUC
AV 3
PUC
Y Pb Pr SPDIF
CINEMA CONTROL
For a Home Automation system.
PROJECTOR OUT (DVI-D OUT)
Connect a projector.
HDMI IN (A–D)
For High Definition Multimedia Interface video
source or PC. The sources can be registered to any
of the AV socket groups. Connect an HDMI
Expander to the HDMI C socket.
~ – Mains supply
Connection to the mains supply.
1
*NOTE! Only connect to a local area network
(LAN) that does not exit your flat, house or
building.
CENTRE
1
1 (SUB)
2
POWER
3
LINK
4
5
6
Analogue