Changing The Battery - D.T.Systems NO BARK TRAINER Instruction Manual

Use only 6 Volt Alkaline or Lithium Battery.
Follow these steps to change the battery on the 1145DT:
1) Use a coin or screw driver to open the battery
compartment cap by turning it counter-clockwise.
2) Remove the old battery.
3) Insert the new battery positive "+" side first into the
battery compartment.
4) Close the battery cap in a clockwise direction.
Make sure to check that the cap is properly closed and

CHANGING THE BATTERY

(Lithium will last longer)
CAUTION
tightened to prevent water leakage.
NOTE
9