Table of Contents
Advertisement
ADJUSTING & POSITIONING YOUR COLLAR
Proper collar tightness and position are very important to
insure safety and correct functioning every time you use
the collar.
•
All electronic collars need to be very snug to work
properly. They must be just tight enough to allow the
electrodes and the sensor to make good skin contact.
•
If your collar is too loose, the stimulation may not work
properly because good skin contact is not being achieved.
This can directly affect the stimulation performance and
whether or not the dog will receive the stimulation. Always
check for good contact if it appears that your dog is not
responding to the stimulation.
•
A loose collar can promote skin irritation from moving or
rubbing too much on a dog's neck while they are running or
training. The proper snug fit will help prevent this from
occurring.
•
Proper fit of the collar is extremely important. It should be
just tight enough on the dog's neck to make good skin
contact while still allowing the dog to breath normally. The
collar should never be so tight that it restricts the dog's
normal breathing pattern.
•
For proper positioning of your collar receiver box, it should
be placed so that the electrodes and sensor are facing the
dog's vocal cords.
•
Check your dog's neck daily for signs of possible irritation.
FOR PROPER FIT
7
Advertisement
Table of Contents
