Choosing The Correct; Electrodes And Sensors - D.T.Systems NO BARK TRAINER Instruction Manual

CHOOSING THE CORRECT

ELECTRODES AND SENSORS

Choosing the proper electrode and sensor length is vital to
the proper operation of the unit.
Electrodes and sensors should be long enough to make
good contact with the dog's skin without being so long as
to interfere with the dog's normal breathing.
***Tip: With some longer haired dogs it can be beneficial
to trim the hair around the area of the voice box.***
When screwing in the electrodes and sensor,
tighten by hand only. Proper hand tightening will
allow the electrodes and sensor to vibrate for
maximum stimulation. Over tightening can cause
damage to the unit.
CAUTION
6