Operating Instructions; Changing Intensity Levels - D.T.Systems BOSS Bark Owner's Manual

Bark BOSS No-Bark Operating Instructions
On/Off switch & Intensity dial
(Levels 1-8 and "T" for Tone only)
Tone
Rechargeable battery compartment
Beeping
NOTE: comes with RECHARGEABLE battery.
Speaker
(Replaceable battery pack sold separately.)
Turning the unit OFF
To turn the unit off, simply reverse the procedure. Turn the dial to
the "O" Off position. You will hear a long two-second beep. The
unit is now OFF.
Changing the Intensity Level
Once the unit is ON, you can change the Intensity level by turning
the dial to the corresponding number (1-8, or "T" for Tone only).
The "O" position is the OFF position. The "T" position is the Tone
(beep) only position. Levels 1-8 are indicated around the dial, and
when they are lined up with the arrow on top of the unit, the corre-
sponding level will be programmed.
NOTE: A test light is included to test the unit's function. The light
will be brighter as the levels go up from 1 to 8.
NOTE: You will also hear a beeping tone every time you change
the dial and a double beep when you turn the unit off.
Turning the unit ON
To turn on the unit, turn the
dial from the off position to
one of the levels (shown on
the dial from 1-8 as well as
a "T" for TONE
ONLY) You will
hear a series of
quick beeps. The
LED indicator light
will flash to indicate
power is on.
4