Maintaining the printer
Sleep mode
1
From the home screen, touch Settings > Device > Power Management > Timeouts > Sleep Mode.
2
Enter the number of minutes the printer stays idle before it enters Sleep mode.
Hibernate mode
1
From the home screen, touch Settings > Device > Power Management > Timeouts > Hibernate Timeout.
2
Select the amount of time before the printer enters hibernate mode.
Notes:
•
Make sure to wake the printer from hibernate mode before sending a print job.
•
The Embedded Web Server is disabled when the printer is in hibernate mode.
Adjusting the brightness of the printer display
1
From the home screen, touch Settings > Device > Preferences > Screen Brightness.
2
Adjust the setting.
Conserving supplies
•
Print on both sides of the paper.
Note: Two-sided printing is the default setting in the print driver.
•
Print multiple pages on a single sheet of paper.
•
Use the preview feature to see how the document looks like before printing it.
•
Print one copy of the document to check its content and format for accuracy.
Disabling the proximity sensor
Note: This feature is available only in some printer units.
From the home screen, touch Settings > Power Management > Timeouts > Disabled.
To keep the sensor running, do the following:
•
Remove any obstructions within 1.5 m (5 ft.).
•
Remove other devices that interfere with the sensor.
Recycling
Recycling Lexmark products
To return Lexmark products for recycling:
1
Go to www.lexmark.com/recycle.
2
Select the product you want to recycle.
109