The Led Indicators; The Pacifier Tones & The Led Indica�Ng Signals - Transmitter Solutions DOLKSS1KB Programming & Installation Manual

Self-contained digital access control keypad
Hide thumbs Also See for DOLKSS1KB:
Table of Contents

Advertisement

THE LED INDICATORS

MAINS (AMBER)
This is a status indicator. It flashes during standby and other indica�ons in synchroniza�on with
the pacifier tones. See the chart of LED indica�on signals below for the details.
DOOR (GREEN)
It lights up in green while output 1 is ac�ve (The door is open).
INHIBIT (RED)
It lights up while output 1 is inhibited; including manually inhibited with Super User Code or due
to False Code Lock-up se�ng in Loca�on 70.
BACK LIGHTING
The keypad is in dim back ligh�ng during the standby period. It gets brighter for 10 seconds on each
key bu�on press, which indicates the allowable �me for succeeding code entry. The previous codes
will be cancelled if no code is entered within 10 seconds.
THE PACIFIER TONES & THE LED INDICATING SIGNALS
The built-in buzzer and the MAINS LED indicator give the following tones and signals for opera�on
status:
STATUS
1. In programming mode
2. Successful key entry
3. Successful code entry
4. Unsuccessful code entry
5. DAP jumper not replaced
6. In standby mode
7. Output relay activated
NOTE:
* All Pacifier Tones can be enabled or disabled through programming op�ons at Loca�on 83.
** The Output Ac�va�on Beep can be enabled or disabled through programming op�ons at Loca�on 81.
TONES*
---
1 Beep
2 Beeps
5 Beeps
Continuous Beeps
---
1 second Long Beep **
5
LED SIGNALS
ON
1 Flash
2 Flashes
5 Flashes
Continuous Flashes
1 Flash in 2 seconds interval
---

Advertisement

Table of Contents
loading

Table of Contents