Table of Contents
Advertisement
False A�empt System Lock-up or Repor�ng
The keypad can be programmed to give system lock up or to report the event in order to secure the
premises against unauthorized entry of mul�ple false codes are entered. The lock-up op�ons are
represented by a 1 or 2 digits code for owner's selec�on.
Programming Codes for Lock-Up Options:
-- A�er 10 successive false a�empts using incorrect user codes, the keypad will lock for 30
seconds (Default).
to
-- A�er 5 to 10 successive false a�empts using incorrect user codes, the keypad will
lock for 15 minutes. The lock-up can be terminated at any �me with Super User
Code during the locking period if required.
Super User Code
-- No system lock-up will happen.
Programming Examples:
1. Set keypad to programming mode with master code and
programmed master code 3 2 8 9 as example here:
2. Set keypad to lock 15 minutes a�er 5 successive false a�empts using incorrect user codes:
3. Exit programming mode by pressing the
Loca�ons
Lock-Up Op�ons
1 to 2 Digits
19
Confirm
key. Taking the previous
(Loca�on 70)
Advertisement
Table of Contents
