Table of Contents
Advertisement
Configura�on of Output 1 for Electric Lock
There are two types of electric door locks on the market. They are Fail-Secure and Fail-Safe. It is
necessary to select the right one for your applica�on environment. The keypad has been designed
compa�ble with both types of lock with an appropriate code of the type of lock.
Programming Codes for Type of Locks:
-- Fail-Secure Electric Lock ---
-- Fail-Safe Electric Lock
Important Note to Installer:
It is necessary to confirm that the lock is Fail-Secure or Fail-Safe before se�ng the type of lock for it.
Wrong se�ng a Fail-Secure electric lock to normally energized opera�on may cause damage to the
lock or even the keypad; because the Fail-Secure electric lock usually takes high current and is not
suitable for normally energized opera�on.
Loca�ons
Type of Lock
0 or 1
It is normally de-energized (OFF) to lock, power ON to unlock
(security first) (Default).
e.g. Fail-secure Electric strike locks etc.
---
It is normally energized (ON) to lock, power OFF to unlock (safety
first).
e.g. Electro-magne�c locks, Drop bolt locks, Fail-safe Electric strike
locks etc.
18
Confirm
(Loca�on 66)
Advertisement
Table of Contents
