Table of Contents
Advertisement
Output Ac�va�on Announcer
The purpose of output ac�va�on announcer is to give a sound signal to no�fy the visitor outside to
open the door when the lock is ac�vated. It is good for the locking device, such as a magne�c lock
that gives no sound when it is ac�vated.
Programming Options:
-- No output ac�va�on no�fica�on will be given when the door lock is opened.
-- The keypad will beep twice when the door lock is opened.
-- The keypad will give a one second long beep when the door lock is opened (Default).
User Code Entry Modes (Auto or Manual)
Some users like to press
person to easily check out the digit length of the user code; but some people do not. They prefer the
keypad to check the code automa�cally when the last number of digit is reached. The keypad can be
programmed for auto or manual user code entry modes.
Programming Options:
Manual code entry mode (Default), The
--
to indicate the code has been entered completely. In this case, the user codes can be 4-8
digits
arbitrary and they are not required to be in the same digit length of the master code.
.
--
Auto code entry mode, Pressing the
auto code entry mode, all user codes must have the same number of digit as the master
code. For example, if
well.
Loca�ons
Func�on Op�ons
0, 1 or 2
key to confirm a code entry manually to prevent the unauthorized
Loca�ons
Func�on Op�ons
0 or 1
the master code is 5 digits, then all the user codes must be 5 digits as
.
Confirm
Confirm
key must be pressed a�er entry of an user code
key is not required a�er entry of a user code. In
20
(Loca�on 81)
(Location 82)
Advertisement
Table of Contents
