Programming Examples For "Single-User Mode - Transmitter Solutions DOLKSS1KB Programming & Installation Manual

2) Recording Super User Code – User Programming
Loca�on Entry of Code

4 digits fixed
3) Recording the Visitor Codes – User Programming
Loca�on Opera�on Time Entry of Code Confirm

00 to 99

Programming Examples for "Single-User Mode"

1. Set keypad to programming mode with the Ex-factory Master Code 0 0 0 0 or your Master Code if
it was changed:
2. Refresh the keypad to Single-User Mode with Refreshing code 8 9 0 0:
3. Program a new Master Code 3 2 8 9 for the keypad:
4. Program an User Code 8 3 2 1 for output 1:
5. Program a Super User Code 2 5 8 0:
6. Program a Visitor Code 2 3 0 8 with Time-Limit of 8 hours:
7. Exit programming mode by pressing the
Confirm Comments

Owner's Mul�-task User Code
4 digits fixed
 
 
  
  
  
   

25
Comments

visitor code for opera�ng Output 1.
Opera�on Time:
00 = One �me use only
01 to 99 = Valid within �me limit of 1-99 hours
(No Default Codes)
(No Default Codes)