Table of Contents
Advertisement
Programming The Super User Code
Super User Code is a mul�-task user code for ac�va�ng the output 1 and opera�ng the special
func�ons of Output 1.
NOTE:
● The super user code can be 4-8 digits long in manual code entry mode; but must has the same
length as the master code if the keypad is in auto code entry mode.
● Super user code and Egress Bu�on are excluded from any system opera�on inhibit and lock-up;
they are always valid for door open at any�me for safety.
● See "Programming Summary Chart" Sec�on C – 2 for more informa�on
● See informa�on on Loca�on 82 concerning digit length in Auto and Manual code entry modes.
Programming Example :
1. Set keypad to programming mode with master code and
master code 3 2 8 9 as example here:
2. Program 2 5 8 0 as Super User Code:
3. Exit programming mode by pressing the
Operation :
1) Opera�ng Output 1
Super User Code is just like a normal user code. Simply key-in the code with a specific output
number of the desired output. Super User Code can also be used to reset an output opera�ng
with long �mer instantly at any�me required.
Loca�ons
Super User Code
4 - 8 Digits
------- Output 1 Ac�vates or De-ac�vates
12
Confirm
key. Taking the previous programmed
(Loca�on 45)
Advertisement
Table of Contents
