Figure 14: Chassis Status Leds In An Nfx150-S1 Device; Table 12: Chassis Status Leds In An Nfx150 Device; Table; Chassis Status Leds - Juniper NFX150 Hardware Manual

NFX150 Network Services Platform Hardware Guide

Table 12: Chassis Status LEDs in an NFX150 Device

LED Label
ALM (Alarm)
SYS (System)
MST (Master)
PH
34

Figure 14: Chassis Status LEDs in an NFX150-S1 Device

1—

Chassis status LEDs (

ALM
PH
)
Table 12 on page 34 describes the chassis status LEDs in an NFX150 device, their colors
and states, and the status they indicate. You can view the colors of the four LEDs remotely
through the CLI by issuing the operational mode command
Color
Unlit
Red
Amber
Green
Green
Unlit
Green
Amber
A major alarm (red) indicates a critical error condition that requires immediate action.
1
, SYS , MST , and 2— Slot
State and Description
There is no alarm or the device is halted.
There is a major alarm.
There is a minor alarm.
On steadily—Junos OS has been loaded on the device.
Blinking—The device is booting.
Off—The device is powered off or is halted.
On steadily—The device is functioning normally.
Off—The device is powered off or is halted.
There is no Network Service Activator transaction.
On steadily—Network Service Activator transaction is
successfully completed. That is, the Network Service
Orchestrator in NFX150 contacted the Network Service
Activator and provisioned the software image successfully.
Blinking—Network Service Activator transaction is underway.
Off—The device is powered off or is halted.
On steadily—Network Service Activator transaction is
terminated unsuccessfully.
Blinking—Network Service Activator transaction is waiting
for user input.
.
show chassis led
Copyright © 2018, Juniper Networks, Inc.