Attaching The Voltage Sensors To The Circuit - Hioki PD3259-90 Instruction Manual

2.7 Attaching the Voltage Sensors to the Circuit

Proper attachment method
Align the mark on each voltage sensor to the insulated target wire and clip
it securely in place. The sensors can be attached to wires with diameters
ranging from 6 mm to 30 mm.
To prevent electric shock, do not touch the clips in
front of the barrier during use.
Example: When measuring a thick insulated wire
Insulated wire
Mark
Example: When measuring a thin insulated wire
Insulated wire
Mark
Attaching the Voltage Sensors to the Circuit
DANGER
Insulated wire
Barriers
Insulated wire
Barriers
Insulated wire
Mark
Marks
Insulated wire
Mark
Marks
1
2
3
4
5
6
7
付
録
索
引
25