Installing And Replacing Batteries - Hioki PD3259-90 Instruction Manual

Installing and Replacing Batteries

2.4 Installing and Replacing Batteries
When using the instrument, install four LR6 (AA-size) alkaline
batteries. Verify that sufficient battery strength remains before
measurement. If there is insufficient battery power remaining,
replace the batteries (p. 1 7).
You will need
• A screwdriver
• LR (AA-size) alkaline batteries × 4
Procedure
1
Press POWER
2
Untighten the screws that holds the battery cover in place
with the screwdriver and remove the cover.
3
If replacing the batteries, remove all old batteries.
4
Install four new batteries, taking care to orient them properly.
5
Reattach the battery cover and tighten the screw (M3 × 8 mm).
Screws
22
to turn off the instrument.