Table of Contents
Advertisement
4.3 Turning On the Backlight
This section describes how to turn on the backlight. The backlight
makes it possible to view the display clearly in dim locations where
the LCD would otherwise be difficult to see.
Enabling and disabling the backlight
Press and hold HOLD.
(To select whether to enable or disable
the backlight.)
Ordinarily the yellow-green backlight
turns on. The red backlight turns on only
when reversed phase is detected.
The backlight automatically turns off 30
sec. after turning on, regardless of the hold
function or screen transitions. However,
when phase detection results are being
displayed on the Phase Detection screen,
the backlight color will change to reflect the
phase detection results after 30 sec.
Turning On the Backlight
1
2
3
4
5
6
7
付
録
索
引
43
Advertisement
Table of Contents
