Enabling And Disabling The Beep Function - Hioki PD3259-90 Instruction Manual

Power-on Options

Enabling and disabling the beep function

This section describes how to enable or disable the beeping tones
that the instrument emits during key operation and phase detection.
The beep function setting will take effect the next time the
instrument is turned on.
40
1
Turn on the instrument while
holding down MODE.
2
Press MODE.
3
Press HOLD
to enable or disable the beep
function ([on]↔[oFF]).
4
Press MODE.
(After the power-on screen is displayed,
the instrument will display the Line
Voltage Measurement screen.)
to select whether