Table of Contents
Advertisement
Chapter 4: BIOS
Flow Control
Use this feature to set the flow control for Console Redirection to pre-
vent data loss caused by buffer overflow. Send a "Stop" signal to stop
sending data when the receiving buffer is full. Send a "Start" signal
to start sending data when the receiving buffer is empty. The options
are None and Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/
VT100 terminals. The options are Enabled (checked) and Disabled
(unchecked).
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send
it as text messages to a remote server. The options are Enabled
(checked) and Disabled (unchecked).
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options
are Enabled (checked) and Disabled (unchecked).
Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in
Console Redirection for legacy OS support. The options are 80x24
and 80x25.
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which
is a terminal emulator designed for the Windows OS. The options are
VT100, LINUX, XTERMR6, SCO, ESCN, and VT400.
Redirection After BIOS POST
Use this feature to enable or disable legacy Console Redirection after
BIOS POST. When the option-Bootloader is selected, legacy Console
Redirection is disabled before booting the OS. When the option- Always
Enable is selected, legacy Console Redirection remains enabled upon
OS bootup. The options are Always Enable and Bootloader.
Legacy Console Redirection
Legacy Console Redirection Settings
4-17
Advertisement
Table of Contents
