Supero C7B250-CB-ML User Manual page 82

Supermicro C7B250-CB-ML Motherboard User's Manual
*If the feature above set to Enabled, the following features will become
available for configuration:
Console Redirection Settings
Terminal Type
This feature allows the user to select the target terminal emulation
type for Console Redirection. Select VT100 to use the ASCII Character
set. Select VT100+ to add color and function key support. Select ANSI
to use the Extended ASCII Character Set. Select VT-UTF8 to use UTF8
encoding to map Unicode characters into one or more bytes. The op-
tions are ANSI, VT100, VT100+, and VT-UTF8.
Bits per second
Use this feature to set the transmission speed for a serial port used
in Console Redirection. Make sure that the same speed is used in the
host computer and the client computer. A lower transmission speed
may be required for long and busy lines. The options are 9600, 19200,
38400, 57600, and 115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirec-
tion. The options are 7 (Bits) and 8 (Bits).
Parity
A parity bit can be sent along with regular data bits to detect data
transmission errors. Select Even if the parity bit is set to 0, and the
number of 1's in data bits is even. Select Odd if the parity bit is set
to 0, and the number of 1's in data bits is odd. Select None if you
do not want to send a parity bit with your data bits in transmission.
Select Mark to add a mark as a parity bit to be sent along with the
data bits. Select Space to add a Space as a parity bit to be sent with
your data bits. The options are None, Even, Odd, Mark, and Space.
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit
for standard serial data communication. Select 2 Stop Bits if slower
devices are used. The options are 1 and 2.
4-16