Table of Contents
Advertisement
Software Installation Instructions
B-1 Installing Drivers
After you've installed the Windows Operating System, a screen as shown
below will appear. You are ready to install software programs and drivers
that have not yet been installed. To install these software programs and
drivers, click the icons to the right of these items. (Note: To install the
Windows Operating System, please refer to the instructions posted on
our website at http://www.supermicro.com/support/manuals/.)
Note 1. Click the icons showing a hand writing on the paper to
view the readme files for each item. Click on a computer icon to
the right of an item to install this item (from top to bottom), one
at a time. After installing each item, you must reboot the system
before proceeding with the next item on the list. The bottom icon
with a CD on it allows you to view the entire contents of the CD.
Note 2. When making a storage driver disk by booting into a Driver
CD, please set the SATA Configuration to "Compatible Mode" and
configure SATA as IDE in the BIOS Setup. After making the driver
disk, be sure to change the SATA settings back to your original
settings.
Appendix B
Driver/Tool Installation Display Screen
Appendix B: Software Installation Instructions
B-1
Advertisement
Table of Contents
