Dynamic Dns - SMC Networks Edge-corE NETWORKS BARRICADE SMCWGBR14-N2 User Manual

LAN
D DNS
YNAMIC
Choose menu "Network->LAN", you can configure the IP parameters of the
LAN on the screen as below.
Figure 26: LAN Settings
MAC Address - The physical address of the Router, as seen from the
◆
LAN. The value can't be changed.
IP Address - Enter the IP address of your Router or reset it in dotted-
◆
decimal notation (factory default: 192.168.2.1).
Subnet Mask - An address code that determines the size of the
◆
network. Normally use 255.255.255.0 as the subnet mask.
If you change the IP Address of LAN, you must use the new IP
N :
OTE
Address to login the Router.
If the new LAN IP Address you set is not in the same subnet, the IP
N :
OTE
Address pool of the DHCP server will change accordingly at the same time,
while the Virtual Server and DMZ Host will not take effect until they are re-
configured.
s
Choose menu "Dynamic DNS", and configure the Dynamic DNS function.
The Router offers the DDNS (Dynamic Domain Name System) feature,
which allows the hosting of a website, FTP server, or e-mail server with a
fixed domain name (named by yourself) and a dynamic IP address, and
then your friends can connect to your server by entering your domain
name no matter what your IP address is. Before using this feature, you
need to sign up for DDNS service providers such as www.comexe.cn,
www.dyndns.org, or www.no-ip.com. The Dynamic DNS client service
provider will give you a password or key.
– 41 –
| Network Settings
C 5
HAPTER
LAN