SMC Networks Edge-corE NETWORKS BARRICADE SMCWGBR14-N2 User Manual page 37

If your ISP provides L2TP connection, please select L2TP option, then enter
the following parameters :
Figure 23: WAN-L2TP
User Name/Password - Enter the User Name and Password provided
◆
by your ISP. These fields are case-sensitive.
Dynamic IP/ Static IP - Choose either as you are given by your ISP.
◆
Click the Connect button to connect immediately. Click the Disconnect
button to disconnect immediately.
Connect on Demand - You can configure the Router to disconnect
◆
from your Internet connection after a specified period of inactivity (Max
Idle Time). If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to automatically re-
establish your connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the radio
button. If you want your Internet connection to remain active at all
times, enter 0 in the Max Idle Time field. Otherwise, enter the number
of minutes you want to have elapsed before your Internet connection
terminates.
Connect Automatically - Connect automatically after the Router is
◆
disconnected. To use this option, click the radio button.
– 37 –
| Network Settings
C 5
HAPTER
WAN