Table of Contents
Advertisement
Region - Select your region from the pull-down list. This field specifies
◆
the region where the wireless function of the Router can be used. It
may be illegal to use the wireless function of the Router in a region
other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for
assistance.
When you select your local region from the pull-down list, click the Save
button, then the Note Dialog appears. Click OK.
Figure 34: Note Dialog
Limited by local law regulations, version for North America does not
N
:
OTE
have region selection option.
Channel - This field determines which operating frequency will be
◆
used. The default channel is set to Auto, so the AP will choose the best
channel automatically. It is not necessary to change the wireless
channel unless you notice interference problems with another nearby
access point.
◆
Mode - Select the desired mode. The default setting is 11bgn mixed.
11b only - Select if all of your wireless clients are 802.11b.
■
11g only - Select if all of your wireless clients are 802.11g.
■
11n only- Select only if all of your wireless clients are 802.11n.
■
11b/g mixed - Select if you are using both 802.11b and 802.11g
■
wireless clients.
11b/g/n mixed - Select if you are using a mix of 802.11b, 11g, and
■
11n wireless clients.
Select the desired wireless mode. When 802.11g mode is selected, only
802.11g wireless stations can connect to the Router. When 802.11n mode
is selected, only 802.11n wireless stations can connect to the AP. It is
strongly recommended that you set the Mode to 11b/g/n mixed, and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the
Router.
Channel width - Select any channel width from the pull-down list. The
◆
default setting is automatic, which can adjust the channel width for
your clients automatically.
– 48 –
| Wireless Settings
C
6
HAPTER
Wireless Settings
Advertisement
Table of Contents
