Table of Contents
Advertisement
Item
Wireless
Input the wireless password
Password
of the SSID. If open system
authentication is used, input
of the wireless password is
unnecessary.
CODE
Input the Connection CODE
displayed on the screen of
the projector.
Connect
Connect to the projector that
is set in the items above and
start to project an image.
Using the Controller
For Windows:
Network
Presentation
CODE: 1234
User 000001
8
For Mac:
CODE: 1234
User64
1
Items
50
Using Presentation Function via Network
Item descriptions
Functions
Start projecting an image.
Pause projecting an image.
Stop projecting an image
(screen turns black).
Change the application
settings.
Disconnect from the
projector.
Select a projection method
then start projecting an
image.
Items
Projection
Not projecting an image.
method
Project in full screen.
Project in the left half of
the screen.
Project in the right half of
the screen.
Project in the upper left
quadrant of the screen.
Project in the upper right
quadrant of the screen.
Project in the lower left
quadrant of the screen.
Project in the lower right
quadrant of the screen.
Display the strength of the
wireless signal.
Display the Connection
CODE of the projector
CODE
that is connected to the
computer.
Display the number of
users connected to the
projector.
Display the users' status.
One-Click projecting function
Projector Station for Network Presentation
allows you to create a shortcut that registers
the connection setting.
By starting the application with the shortcut,
you can project the image to the registered
projector.
1
Create a file.
For Windows
Create a shortcut to the
NetworkPresentation.exe. Copy the
shortcut to the Projector Station for
Network Presentation, or right-click the
NetworkPresentation.exe in the installed
folder to select "Create shortcut" from
the pop up menu.
For Mac
Create a text file with any name with a
text editor. Set the format to "Plain
Text."
Functions
Advertisement
Table of Contents
