Table of Contents
Advertisement
b) Wireless direct connection
Select or directory input the SSID of the
projector that the computer is connected
"
to. If the
WLAN settings
"
Access Pt.(Auto)
"
checked, you can skip inputting the
wireless password.
3
Click "Connect".
If other users are projecting an image,
the controller appears on the screen.
Click the
to start projecting an
image (page 49).
If no users are projecting an image, the
controller appears on the screen and
starts projecting an image.
Note
Display related settings (such as your
computer's resolution) change when the
application is started.
Connection Settings
Item
Item descriptions
IP Address
Input the IP Address.
List the IP addresses of the
projectors on the network
and IP addresses of
projectors connected so far,
as candidates.
SSID
Input SSID.
List the peripheral SSIDs
and SSIDs of projectors
connected to the computer
so far, as candidates.
Update
Search the network again
button
and update the candidate list
of the projectors.
Security
Displays the security method
Method
of the input SSID.
Wireless
Input the wireless password
Password
of the SSID. If open system
Authentication is used, input
of the wireless password is
unnecessary.
Auto
Check this item when the
(checkbox)
"WLAN settings
"Access Pt.(Auto)
CODE
Input the Connection CODE
displayed on the screen of
the projector.
"
is set to
and
"
Auto
"
has been
"
is set to
"
.
Item
Item descriptions
Connect
Connect to the projector that
is set in the items above and
start to project an image.
Using the Controller
For Windows:
Network
Presentation
CODE: 1234
User 000001
8
For Mac:
CODE: 1234
User64
1
Items
Start projecting an image.
Pause projecting an image.
Stop projecting an image
(screen turns black).
Change the application
settings.
Disconnect from the
projector.
Select a projection method
then start projecting an
image.
Using Presentation Function via Network
Functions
49
Advertisement
Table of Contents
