Connection Settings; Using The Controller - Sony VPL-SW620 Operating Instructions Manual

b) Wireless direct connection
Select or directly input the SSID of the
projector that the computer is connected
"
to. If the WLAN settings
" Access Pt.(Auto)
checked, you can skip inputting the
wireless password. If the Connection
CODE function is activated, input the
four digit Connection CODE that is
displayed on the right bottom area of the
screen (only on the projectors with the
Connection CODE function).
Since the Connection CODE function is
not available on this projector, there is
no need to enter the code for connection.
3
Click "Connect".
If other users are projecting an image,
the controller appears on the screen.
Click the
image (page 60).
If no users are projecting an image, the
controller appears on the screen and
starts projecting an image.
Note
Display related settings (such as your
computer's resolution) change when the
application is started.

Connection Settings

Item
IP Address Input the IP Address.
List the IP addresses of the
projectors on the network
and IP addresses of
projectors connected so far,
as candidates.
SSID Input SSID.
List the peripheral SSIDs
and SSIDs of projectors
connected to the computer
so far, as candidates.
Update Search the network again
button and update the candidate list
of the projectors.
Security Displays the security method
Method of the input SSID.
60
Using Presentation Function via Network
"
is set to
" and " Auto " has been
to start projecting an
Item descriptions
Item Item descriptions
Wireless Input the wireless password
Password of the SSID. If open system
Authentication is used, input
of the wireless password is
unnecessary.
Auto Check this item when the
(checkbox) "WLAN settings
"Access Pt.(Auto)
CODE Input the Connection CODE
displayed on the screen of
the projector (only on the
projectors with the
Connection CODE
function). The Connection
CODE function is not
available on this projector.
Connect Connect to the projector that
is set in the items above and
start to project an image.

Using the Controller

For Windows:
Network
Presentation
CODE: 1234
User 000001
8
For Mac:
CODE: 1234
User64
1
Items
Start projecting an image.
Pause projecting an image.
Stop projecting an image
(screen turns black).
"
is set to
"
.
Functions