Table of Contents
Advertisement
The following window appears in the
Web browser:
Once you make the network settings,
you can open the Control window only
by performing step 3 of this procedure.
How to operate the Control window
Switching the page
Click one of the Page Switching buttons to
display the desired setting page.
Page Switching buttons
Setting the access limitation
You can limit a user for accessing any
particular page.
Administrator: Allowed access to all
pages
User: Allowed access to all pages except
the Setup page
Set the access limitation from [Password] of
the Setup page.
When you access the Setup page for the first
time, enter "root" in the Name box and enter
"Projector" in the Password box of User.
When you log in for the first time, the
window that prompts you to change the
password is displayed. Follow the
instructions on the screen to change the
password.
The Name box of the Administrator is preset
to "root."
Entry area for [Administrator]
Entry area for [User]
When you change the password, input a new
password after deleting the password
(*****) that was set.
The password of the administrator and user
should be 8 to 16 characters that includes
both alphabet and numeric characters.
Alphabet is case-sensitive.
The default password "Projector" cannot be
set as a new password.
Note
If you forget your password, consult with
qualified Sony personnel.
The password will be reset with your
permission.
Confirming the Information
regarding the Projector
You can confirm the current settings for the
projector on the Information page.
Information area
Using Network Features
37
Advertisement
Table of Contents
